Round Ornate Doorbell Plate with Bell Push
Item No. 452-1
This traditional doorbell plate features an ornate circular design with decorative detailing around the edge. It is made from cast aluminium using the traditional sand-casting process rather than die casting.
The plate is supplied with a ready-to-connect low-voltage bell push, available in black with a brass or copper-coloured trim, or in an aluminium finish. The bell push features either push-fit or screw terminals for connecting the bell wires.
Choose your preferred paint finish and patina from our range of colours and finishes. Custom paint finishes and individual patination options are also available on request.
The distance between the two mounting holes is approximately 74 mm. The plate can also be surface-mounted using either the aluminium-finish bell push or the black bell push with copper-coloured trim.
The plate is supplied with two brass or stainless steel mounting screws and wall plugs.
Gallery
The plate is supplied with a ready-to-connect low-voltage bell push, available in black with a brass or copper-coloured trim, or in an aluminium finish. The bell push features either push-fit or screw terminals for connecting the bell wires.
Choose your preferred paint finish and patina from our range of colours and finishes. Custom paint finishes and individual patination options are also available on request.
The distance between the two mounting holes is approximately 74 mm. The plate can also be surface-mounted using either the aluminium-finish bell push or the black bell push with copper-coloured trim.
The plate is supplied with two brass or stainless steel mounting screws and wall plugs.
Gallery
Each item is painted and patinated by hand to order. You can specify whether you prefer a subtle or more pronounced patina, or whether you would like the decorative contours to stand out more clearly.
We use high-quality protective metal paints and primers. Minor damage to the finish can be touched up if necessary.
We use high-quality protective metal paints and primers. Minor damage to the finish can be touched up if necessary.
View all available colours.
Specifications of the bell buttons:
 |
Push-button material: Black plastic Push-button diameter: Ø 10 mm Overall diameter: 18 mm |
|---|---|
 |
Push-button material: Aluminium-coloured Push-button diameter: Ø 11.5 mm Overall diameter: 22 mm |
 |
Push-button material: Black plastic Push-button diameter: Ø 11.5 mm Overall diameter: 22 mm |
| Maximum switching capacity: | 12 V AC/DC 1.5 A |
| Minimum switching capacity: | 5 V / 1 mA |
| Wire diameter: | 0.6 to 0.8 mm |
| Switching travel: | 0.8 mm to 2 mm |
| Total operating travel: | 1.2 mm to 3 mm |
| Operating temperature: | −20 °C to +60 °C |
| Protection rating: | IP54 when installed in a vertical plate |
The bell contacts must be connected to an existing doorbell system. A bell transformer, chime and intercom equipment are not included.
You might also be interested in
