Doorbell Button
Item No. 971
Round doorbell button with a decorative and simple structure. It is made to be glued to the wall - optional, we can drill two holes for mounting it the usual way.
(Glue not included) Round bell plate with harmoniously curved decorations and a perforated edge. For mounting on a façade with light exterior insulation, this bell plate can be glued on without drilling. Upon request, we can also provide two drill holes for screwing the bell plate on. Please provide us with brief information in the 'Comments on your order' field.
Depending on the bell button, the bell contact connections protrude approximately 0.5 cm to 1.5 cm with a diameter of 2 cm.
(Adhesive is not included - if drilling is required, we will include two screws with dowels)
Gallery
(Glue not included) Round bell plate with harmoniously curved decorations and a perforated edge. For mounting on a façade with light exterior insulation, this bell plate can be glued on without drilling. Upon request, we can also provide two drill holes for screwing the bell plate on. Please provide us with brief information in the 'Comments on your order' field.
Depending on the bell button, the bell contact connections protrude approximately 0.5 cm to 1.5 cm with a diameter of 2 cm.
(Adhesive is not included - if drilling is required, we will include two screws with dowels)
Gallery
For a special surface coating, our patina is applied by hand. Effects on the ornaments can be highlighted through this process. With a dual-patina, these effects are even more visible in adding a certain depth to structured surfaces and make it look like old material from bygone eras.
Show all available Colours.
Specifications of the bell buttons:
 |
Push button: Black plastic Push button diameter: Ø 10 mm Overall diameter 18 mm |
|---|---|
 |
Push button: Aluminium-coloured Push button diameter: Ø 11.5 mm Diameter insgesamt: 22 mm |
 |
Push button: Black plastic Push button diameter: Ø 11.5 mm Diameter insgesamt: 22 mm |
| Switching capacity max. | 12 V AC/DC 1.5 A |
| Switching capacity min. | 5 V / 1 mA |
| Connection | 0.6 to 0.8 mm wires |
| Switching distance | 0.8 mm to 2 mm |
| Total actuation path | 1.2 mm to 3 mm |
| Operating temperature | -20 to +60 °C |
| Protection class | IP54 installed in a vertical plate |
The button contacts have to be connected to the existing doorbell.
Bell power adapter, bell wire and bell are not included.
You might also be interested in
