Antique Doorbell Button
Item No. 510-2
A classic, square bell plate made of cast aluminium with a centrally located frame for an interchangeable nameplate.
The bell button is simply connected to the existing bell wire on the back. The back of the bell plate is flat; only the bell contact protrudes slightly – depending on the bell button model – with a diameter of 20 mm, approximately 7 mm (bell button with copper or aluminium rim) to 15 mm (bell button with brass rim) for flush mounting.
Four screws with wall anchors for mounting the bell plate are included. The distance between the mounting holes for the nameplate is approximately 12.3 cm horizontally and 12.5 cm vertically.
Script and block capitals are available for engraving in both uppercase and lowercase letters. Two-line inscriptions are available on request.
The bell button is simply connected to the existing bell wire on the back. The back of the bell plate is flat; only the bell contact protrudes slightly – depending on the bell button model – with a diameter of 20 mm, approximately 7 mm (bell button with copper or aluminium rim) to 15 mm (bell button with brass rim) for flush mounting.
Four screws with wall anchors for mounting the bell plate are included. The distance between the mounting holes for the nameplate is approximately 12.3 cm horizontally and 12.5 cm vertically.
Script and block capitals are available for engraving in both uppercase and lowercase letters. Two-line inscriptions are available on request.
For a special surface coating, our patina is applied by hand. Effects on the ornaments can be highlighted through this process. With a dual-patina, these effects are even more visible in adding a certain depth to structured surfaces and make it look like old material from bygone eras.
Show all available Colours.
Specifications of the bell buttons:
 |
Push button: Black plastic Push button diameter: Ø 10 mm Overall diameter 18 mm |
|---|---|
 |
Push button: Aluminium-coloured Push button diameter: Ø 11.5 mm Diameter insgesamt: 22 mm |
 |
Push button: Black plastic Push button diameter: Ø 11.5 mm Diameter insgesamt: 22 mm |
| Switching capacity max. | 12 V AC/DC 1.5 A |
| Switching capacity min. | 5 V / 1 mA |
| Connection | 0.6 to 0.8 mm wires |
| Switching distance | 0.8 mm to 2 mm |
| Total actuation path | 1.2 mm to 3 mm |
| Operating temperature | -20 to +60 °C |
| Protection class | IP54 installed in a vertical plate |
The button contacts have to be connected to the existing doorbell.
Bell power adapter, bell wire and bell are not included.
You might also be interested in
