Small Doorbell Button
Item No. 948
Small doorbell with leaf pattern.
Small doorbell plate with leaf motifs as edging made of sandcast aluminium (no die cast). The jacks of the bell push protrude slightly to the rear - they disappear in the cable inlet in the wall.
The bell rosette is attached with two small screws.
The bell rosette is attached with two small screws.
Each item is painted and patinated by hand to order. You can specify whether you prefer a subtle or more pronounced patina, or whether you would like the decorative contours to stand out more clearly.
We use high-quality protective metal paints and primers. Minor damage to the finish can be touched up if necessary.
We use high-quality protective metal paints and primers. Minor damage to the finish can be touched up if necessary.
View all available colours.
Specifications of the bell buttons:
 |
Push-button material: Black plastic Push-button diameter: Ø 10 mm Overall diameter: 18 mm |
|---|---|
 |
Push-button material: Aluminium-coloured Push-button diameter: Ø 11.5 mm Overall diameter: 22 mm |
 |
Push-button material: Black plastic Push-button diameter: Ø 11.5 mm Overall diameter: 22 mm |
| Maximum switching capacity: | 12 V AC/DC 1.5 A |
| Minimum switching capacity: | 5 V / 1 mA |
| Wire diameter: | 0.6 to 0.8 mm |
| Switching travel: | 0.8 mm to 2 mm |
| Total operating travel: | 1.2 mm to 3 mm |
| Operating temperature: | −20 °C to +60 °C |
| Protection rating: | IP54 when installed in a vertical plate |
The bell contacts must be connected to an existing doorbell system. A bell transformer, chime and intercom equipment are not included.
You might also be interested in
